TO4 TURBO oil lines and coolant???
01-31-07, 08:33 PM
#1
TO4 TURBO oil lines and coolant???
i am installing my to4b turbo on my engine,now i have a question for those of you who has a turbo other than stock on your rex.
OIL DRAIN. do i need to get a flange made for the drain adapter on the engine or do i tap the aluminum cover.
COOLANT.
do i get a flange made or tap the LIM for the turbo coolant feed.
i want to try not using gear clamps and rubber hoses,i rather have compression fittings or hard pipe connections.
what have you guys done.
OIL DRAIN. do i need to get a flange made for the drain adapter on the engine or do i tap the aluminum cover.
COOLANT.
do i get a flange made or tap the LIM for the turbo coolant feed.
i want to try not using gear clamps and rubber hoses,i rather have compression fittings or hard pipe connections.
what have you guys done.
01-31-07, 09:47 PM
#2
For the oil drain i'm using a -10an SS braided line and fittings from http://www.2751engineering.com/ . The front cover was drilled and tapped in order to attach a -10an fitting.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
