Has anyone had any problems running a single oil cooler with a TO4S on a 3rd gen?

I need opinions on whether I should upgrade to R1 dual coolers or save money for a Greddy, CWR or whatever pops up when I do research on buying. I would like to think since the turbo is water-cooled I wouldn't have to upgrade but I know after all is said and done, it would be a good idea.

Garrett

 

I've never heard of problems... However another or *upgraded* cooler cant hurt!

 

you would just be buying a extra for reliability purposes. From what I have heard the extra oil cooler that the R1 offers, is not that great. Go with 2 upgraded ones, they look better.

 

I have that setup and have not run into any coolant problems at all. May go to 2 coolers just for ***** and giggles-good luck. B

 

Thanks!

I needed a little reassurance.

 

I installed my T04S in my R-1 and got really nervous because of the heat coming from the oil coolers. I did not have any gauge readings but it was physically hotter from my twins. I was told to pay close attention to them and the oil pressure. I decided to replace with the CWR twin coolers and they are significantly cooler. I am also using a 99 air duct. The pressure is also lower after the thermostat opens.

Chris

 

yeah i have a stock oil cooler with my to4s adn it works fine. no over heating. try using valvaline 20-50, joe from smokin joe;s racing said it runs cooler oil temps. you should be fine with the stock oil cooler but it is always good to upgrade if you have the money. good luck.

brandon