sourcing hybrid turbo parts
12-13-06, 04:17 PM
#1
cheap ass
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: Boulder, CO
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
sourcing hybrid turbo parts
lately ive been doing a lot of reading on hybrid turbos people are running in their s4's. the thing is ive also been trying to figure out where to get specific parts and i keep running into problems. nothing is listed on the garrett website and when i called the one of the distributors they said i would need a part number and we could go from there. so heres the million dollar question: WHERE can i find the part numbers?!?!? or where else can i get the parts? i was looking at going with a t04b compressor housing and backing plate and v-trim wheel. basically i like the bnr stage2 without the pricetag. any help would be greatly appreciated.
-jason
-jason
12-13-06, 09:55 PM
#3
cheap ass
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: Boulder, CO
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by that nissan guy
i was looking at going with a t04b compressor housing and backing plate and v-trim wheel. basically i like the bnr stage2 without the pricetag
bottom line is i need to know where you get this kind of stuff
12-14-06, 10:52 AM
#4
Senior Member
turbos_r_us on ebay
i bought exactly what you are looking for (t5/t6 trim wheel, housing, and backplate) as a kit a little over a year ago from them when i did a hybrid, for like $200 total....
i just looked and they arnt offering any right now but if you email them i am sure they have what you need
It is all garrett stuff too... that is where i get all my bearings, seals and such still
zac
http://www.cardomain.com/ride/1149659/1 look on page two... there is a good comparison of that hybrid i made to a stocker
i bought exactly what you are looking for (t5/t6 trim wheel, housing, and backplate) as a kit a little over a year ago from them when i did a hybrid, for like $200 total....
i just looked and they arnt offering any right now but if you email them i am sure they have what you need
It is all garrett stuff too... that is where i get all my bearings, seals and such still
zac
http://www.cardomain.com/ride/1149659/1 look on page two... there is a good comparison of that hybrid i made to a stocker
12-14-06, 08:38 PM
#5
cheap ass
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: Boulder, CO
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
thanks a lot i really appreciate it.
another question though.... i found a site http://www.powertechnologies-turbo.com that has listings of turbo parts but there are like 10 different listings for a t04b compressor housing.... so besides the part number what is the difference?
another question though.... i found a site http://www.powertechnologies-turbo.com that has listings of turbo parts but there are like 10 different listings for a t04b compressor housing.... so besides the part number what is the difference?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
