Single Vacuum Line Diag Question
#1
Tequila? ..it's like beer
Thread Starter
iTrader: (1)
Join Date: Mar 2001
Location: Woodbine, MD
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Single Vacuum Line Diag Question
I've taken a look at the single turbo vacuum line diagram that's been floating around and I have a question regarding one of the lines illustrated. I highlighted it in yellow in the attached pic. Its function is not apparant to me. Is this a way to get a stabile vacuum signal for a boost controller or something? The comments refer to a breather but I'm not that makes sense without a check valve or something.
Thanks much.
Dave
Thanks much.
Dave
#2
Perpetual Rebuilder
All it seemed to me that that line was doing was bypassing the intercooler (though I am sure not much air was going through) So I capped that one of at the lower intake(?). Can't say I am sure that was the right thing to do but it seems to be working for me.
Oh and that drawing is far from complete - I put it together to help people answer the many questions I had when doing my vac lines and have never had the time to go back and finish it.
Drop me a pm, and I'll give you my phone #, and I will be glad to go out and look at my engine and tell you how I did it if you have any questions.
Shawn
Oh and that drawing is far from complete - I put it together to help people answer the many questions I had when doing my vac lines and have never had the time to go back and finish it.
Drop me a pm, and I'll give you my phone #, and I will be glad to go out and look at my engine and tell you how I did it if you have any questions.
Shawn
#3
Tequila? ..it's like beer
Thread Starter
iTrader: (1)
Join Date: Mar 2001
Location: Woodbine, MD
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, Shawn. I think I have things under control. I took a look at this just as a "what am I forgetting" and noticed it. ... and it confused me a tad.
..dave
..dave
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM