Single turbo 20B FC
#1
Newbie
Thread Starter
Join Date: Dec 2001
Location: jesuspants
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Single turbo 20B FC
I'm piecing together my next project. 20b into my s5 T2. I'm going to make (hopefully) an exhaust manifold, but I'm not sure what turbo to run. I am not looking to stress the hell out of this engine right off the boot. I know that a 13b can make the kind of power I'm looking for, but I want the uniqueness and torque of the 3 rotor.
My goals for now are 500 rwhp and an assload of torque. I don't want to swap transmissions now, maybe in the future. I'd like to not run more than 15 psi... I'd like to run as close to 10 psi as possible and still make these numbers. Is this possible? What turbo should I be looking at (I don't want a greddy turbo)?
Thanks for your help!
My goals for now are 500 rwhp and an assload of torque. I don't want to swap transmissions now, maybe in the future. I'd like to not run more than 15 psi... I'd like to run as close to 10 psi as possible and still make these numbers. Is this possible? What turbo should I be looking at (I don't want a greddy turbo)?
Thanks for your help!
#5
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by amemiya
hks t51r kai trust me this turbo would spool nice and will be able to make over 1000 hp at ten lbs you could do 500 hp easy.
hks t51r kai trust me this turbo would spool nice and will be able to make over 1000 hp at ten lbs you could do 500 hp easy.
#6
Banned. I got OWNED!!!
Originally posted by AJC13B
How much NOS do you use to get 1000hp at 10psi?
How much NOS do you use to get 1000hp at 10psi?
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM
stickmantijuana
Single Turbo RX-7's
0
08-21-15 08:35 PM