Single turbo 20B FC
 

I'm piecing together my next project. 20b into my s5 T2. I'm going to make (hopefully) an exhaust manifold, but I'm not sure what turbo to run. I am not looking to stress the hell out of this engine right off the boot. I know that a 13b can make the kind of power I'm looking for, but I want the uniqueness and torque of the 3 rotor.

My goals for now are 500 rwhp and an assload of torque. I don't want to swap transmissions now, maybe in the future. I'd like to not run more than 15 psi... I'd like to run as close to 10 psi as possible and still make these numbers. Is this possible? What turbo should I be looking at (I don't want a greddy turbo)?

Thanks for your help!

T-66 or T-72.

T-72 with HUGE exhaust, like a 1.30 or bigger if you can find. And you will be eating through transmissions like crazy.

hks t51r kai trust me this turbo would spool nice and will be able to make over 1000 hp at ten lbs you could do 500 hp easy.

How much NOS do you use to get 1000hp at 10psi?

i think he forgot a comma or period between hp and at. he said 500 hp at 10 psi, and the potential to make 1000 hp.