Hi guys i have been searching for a aftermarket secondary fuel rail that will allow me to keep the oem injectors (1990 Turbo 2) and use 6AN fittings so i can run to a fuel pressure regulator. I thought i had found a oem one from another rx7 but got it in the mail today and the mounting tabs sit too high to reach the injectors. It was perfect except for the mounting tabs. I can't use the oem cause i cant get the fuel pressure regulator off. So anyone know where i can find one or a way to modify my oem one?

 

there are no options for aftermarket secondary rails using the stock side feeds.

you can modify the factory rail to accept a 6an. this is your option. look up the fpd delete process and it would be the same but you would go from npt to AN instead of npt to barb.

edit: also assuming you are referring to an FD

 

Thanks I called Banzai Racing and talked to Chris and in order to use the rail they say will fit I had to buy the 1050 injectors which he said would be needed in a high psi turbo application so I just bit the bullet and got them. Slowly getting this Triumph GT6 swap completed. This motor better run LOL. I have no clue on the condition as the whole project was given to me.