Single Turbo RX-7's Questions about all aspects of single turbo setups.

RX7 on the way.....Dump Vavle?

Thread Tools
 
Search this Thread
 
Old Jul 28, 2006 | 04:36 PM
  #1  
xanavi22's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 27
Likes: 0
From: Glasgow
RX7 on the way.....Dump Vavle?

Hey Everyone am new here... well i have brought a RX7... and will be heading down to get it soon.... its coverted into single turbo and no dump vavle's fitted... i really want to have one fitted... have would i carry out this one??? here a pic i took of the engine...
Attached Thumbnails RX7 on the way.....Dump Vavle?-yellow-rx-engine.jpg  
Reply
Old Jul 28, 2006 | 05:16 PM
  #2  
xanavi22's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 27
Likes: 0
From: Glasgow
Yeap this is my first visit and i have Registered...
Reply
Old Jul 28, 2006 | 05:54 PM
  #3  
ProjectD's Avatar
I'm on a Boat!
Tenured Member 10 Years
iTrader: (15)
 
Joined: May 2003
Posts: 1,824
Likes: 0
From: OK
By Dump valve i assume you mean BOV. And if that is the case check the piping down by the intercooler endtanks. it might be down there. I don't know who would build a single turbo 7 or any turbo car without a BOV. And if there realy isnt one just buy one and a flange and have it welded to your intercooler pipe (the one near the ast) and do yourself a favor and replace the ast with an aluminum one or eliminate it. Also i would look into an aluminum radiator.

How about som info on the car? Congrats BTW hope it runs well.

Cyan
Reply
Old Jul 29, 2006 | 11:49 AM
  #4  
xanavi22's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 27
Likes: 0
From: Glasgow
I think it was running a Greddy turbo... but i will have a closer look and get back to you... do people normally fit a BOV in the turbo side piping our the engine side piping?
Reply
Old Jul 29, 2006 | 12:07 PM
  #5  
ProjectD's Avatar
I'm on a Boat!
Tenured Member 10 Years
iTrader: (15)
 
Joined: May 2003
Posts: 1,824
Likes: 0
From: OK
from what i've seen they mostly put it between the intercooler and the throttle body.
Reply
Old Jul 29, 2006 | 12:49 PM
  #6  
88t2romad's Avatar
(_8(|)
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 2,034
Likes: 0
From: Manhattan, Kansas
i know rx7store.net sells throttle body adapters with a flange welded on for a greddy bov.
Reply
Old Jul 29, 2006 | 05:29 PM
  #7  
ProjectD's Avatar
I'm on a Boat!
Tenured Member 10 Years
iTrader: (15)
 
Joined: May 2003
Posts: 1,824
Likes: 0
From: OK
Originally Posted by 88t2romad
i know rx7store.net sells throttle body adapters with a flange welded on for a greddy bov.
If you go that route then you'll have to also replace the pipe connecting to the elbow with the compatable peice. It is longer than your current one.
Reply
Old Jul 29, 2006 | 05:41 PM
  #8  
xanavi22's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 27
Likes: 0
From: Glasgow
Hm... sounds like need to buy new pipes then... well will get back to you's when i get it and check out the engine...
Reply
Old Jul 30, 2006 | 05:01 AM
  #9  
xanavi22's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 27
Likes: 0
From: Glasgow
Yeah also this is my first turbo car so i won't know much about them... will like to ask how many mins should i set the turbo timer on before shutting down?
Reply
Old Aug 4, 2006 | 09:10 PM
  #10  
Cgotto6's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,996
Likes: 60
From: Maltby, Washington
Originally Posted by xanavi22
Yeah also this is my first turbo car so i won't know much about them... will like to ask how many mins should i set the turbo timer on before shutting down?
Turbo timers are worthless. Just dont get on boost for the last couple of miles before you shut it off.

Sounds like you have LOTS to learn about these cars. Read the FAQ's in the 3rd gen tech section. It will help you in the long run!!
Reply
Old Aug 4, 2006 | 09:10 PM
  #11  
Cgotto6's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,996
Likes: 60
From: Maltby, Washington
Originally Posted by xanavi22
Yeah also this is my first turbo car so i won't know much about them... will like to ask how many mins should i set the turbo timer on before shutting down?
Turbo timers are worthless. Just dont get on boost for the last couple of miles before you shut it off.

Sounds like you have LOTS to learn about these cars. Read the FAQ's in the 3rd gen tech section. It will help you in the long run!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM




All times are GMT -5. The time now is 02:37 AM.