Race track, new turbo engine, what kinda gas?
#1
Full Member
Thread Starter
Join Date: Nov 2014
Location: florida
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Race track, new turbo engine, what kinda gas?
Ok so I'm going to the track for the first time with my new engine 13b cosmo pinned ported ra super seals s475 25 psi of boost so I want to keep my engine safe while I get up on it this weekend soo Im wondering what kind of gas should I put in it this weekend and what ratio premix while I'm at it? Thanks in advance for ur advise guys
#7
Senior Member
I use the Idemitsu premix, because it's made for rotary engines. But it seems the general consensus is that any good TCW-3 premix works just fine. There are several people on this board that get it from Walmart.
It also seems to be a consensus that you should stay away from the castor oil based premix because it gums up apex and side seals. But it does smell cool....
It also seems to be a consensus that you should stay away from the castor oil based premix because it gums up apex and side seals. But it does smell cool....
Trending Topics
#8
Rotary Enthusiast
iTrader: (19)
Join Date: Apr 2002
Location: Colorado Springs, CO
Posts: 1,169
Likes: 0
Received 11 Likes
on
10 Posts
I use Motul 710 2T. ester based synthetic oil that withstands high temps, can be used in almost anything, injected and premix, JASO FD approved. It isn't THAT expensive compared to comparitive oils. I am finishing up some redline racing synthetic (little more expensive).
Thread
Thread Starter
Forum
Replies
Last Post
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM