Y buddy just picked up a precision 6262 for cheap. The compressor wheel has a few nicks on it.. Is there anyone one here or anyone know of a compressor wheel that will work on this turbo.. It's journal bearing if they're different... Thanks

 

Should also have asked if anyone has a used good one that we know is the correct wheel.

 

You could potentially source one on ebay occasionally. Here is the deal PT will likely charge around $400+/- for the wheel and rebuild however they will only charge about $60 to see if it's still in balance in which case though not ideal overall if it isn't badly damaged performance wont be hindered to a real noticeable extent.

You could likely find a knock off wheel on ebay as well. It likely will require the comp cover to be machined to fit, at least $100 and may need balancing as well, roughly $150+

As a side note precision is not offering Gen2 wheels to be upgraded on their gen1 turbo's so no going that route as well, in case someone wants to know.

~S~

 

Thanks! If anyone happens to see one please let me know about it.. Thanks!