Just wondering what wideband kit most of you guys use.
I was looking at the PLX R500 and the Innovative units.

 

innovate is awesome. ive got the lc-1

 

How easy/hard is it to get the inovative to graph AFR vs. RPM? I know you need a laptop, but how hard is it to get it to sense the RPM? Sorry if this is a dumb question, but just curiouse. thanks.

CJG

 

i have it hooked up to my datalogit so....

 

Are you guys running the O2 full time? Or unplugging it afterwards?
The PLX taps into the stock O2 wiring not sure about the Innovative

 

Fjo

 

limbar,

how difficult was it to get the datalogit, and the innovate to talk with each other?

kenn

 

I use a PLX R500 on my 4Runner...it's a great unit if you want to have a display for both Lambda and EGT all the time. It's also an easy setup. The Innovate goods are a little more techy but definitely powerful. I would get the LM-3 auxbox to go with the LM-1 for a lot of great logging.

I would like to know how you got the LM-1 and the Datalogit to work together too, limbar...

 

EFI systems wideband

 

all the information ud ever need. its an easy hookup/setup
https://www.rx7club.com/showthread.p...light=innovate

 

/\ X2

 

Rock on! Thanks

 

PLX-R500 .Has firmware updates and is a blast, check it out. Very acurate and has a 90 minute data logger on the flash.Also does coolant temp, egt, afr,boost,shift light,speed,rpm,knock sensor,G's. And more to come, everytime a new firmware comes out!!
Here's the link, plxdevices.com .
Check steve at gotham and Cam at pettit. they love it .

 

The Innovate XD-1 wideband gauge monitor is probably one of the best in it's class. One of the best features of this gauge is the warning light function. It's not just max/min A/F values that are recorded but you can program a certain A/F based on TPS, Map etc to activate the warning light.
Check out the manual for the rest of the features.

http://www.innovatemotorsports.com/s...Manual_1.2.pdf