??Pluming 46mm Tial Wastegate to Profec B??
Thread Starter
Joined: May 2002
Posts: 3,454
Likes: 1,062
From: Space Coast, Florida
??Pluming 46mm Tial Wastegate to Profec B??
Can anyone help me hook up my Greddy Profec B spec II to my Tial 46mm. Do i use both nipples on the wastegate? becausce the the greddy manual shows hooking up just one nipple to the wastgate! thanks for any help! Steve
http://www.tialsport.com/documents/w..._wginstall.pdf
Tells you where to put the line in for the boost controller. They call it the manual air regulator "manual boost controller" or electronic air control valve "electronic boost controller".
Tells you where to put the line in for the boost controller. They call it the manual air regulator "manual boost controller" or electronic air control valve "electronic boost controller".
You have to use both nipples. Doing it off of memory, you should be on the COM and NC ports. The NC port is where the boost control goes (top of the wastegate). The lower nipple gets a reference signal from the car (Normal boost). You can tee this line off the vac line you put into the COM port.
Mark White admirer
Joined: May 2004
Posts: 74
Likes: 0
From: Slidell, LA
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
Oct 17, 2020 03:25 PM
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
