??Pluming 46mm Tial Wastegate to Profec B??
 

Can anyone help me hook up my Greddy Profec B spec II to my Tial 46mm. Do i use both nipples on the wastegate? becausce the the greddy manual shows hooking up just one nipple to the wastgate! thanks for any help! Steve

Antone have a diagram??

http://www.tialsport.com/documents/w..._wginstall.pdf

Tells you where to put the line in for the boost controller. They call it the manual air regulator "manual boost controller" or electronic air control valve "electronic boost controller".

SWEET!!! thanks for the help!!!!!

You have to use both nipples. Doing it off of memory, you should be on the COM and NC ports. The NC port is where the boost control goes (top of the wastegate). The lower nipple gets a reference signal from the car (Normal boost). You can tee this line off the vac line you put into the COM port.

Good Diagram
 

https://www.rx7club.com/forum/showpo...11&postcount=2
Barry