Pls help with which turbo
#27
Senior Member
nyt,
I forgot to ask you. Is the PT61 on T4 footprint? You said it uses the GT35R compressor wheel but is the hotside a T4?
Carl,
If the hotside is a true T4 then that should explain why the PT61 pushes more HP than the standard GT35R, which is a T3 footprint.
I forgot to ask you. Is the PT61 on T4 footprint? You said it uses the GT35R compressor wheel but is the hotside a T4?
Carl,
If the hotside is a true T4 then that should explain why the PT61 pushes more HP than the standard GT35R, which is a T3 footprint.
#28
Mad Man
Originally Posted by surfpac
nyt,
I forgot to ask you. Is the PT61 on T4 footprint? You said it uses the GT35R compressor wheel but is the hotside a T4?
Carl,
If the hotside is a true T4 then that should explain why the PT61 pushes more HP than the standard GT35R, which is a T3 footprint.
I forgot to ask you. Is the PT61 on T4 footprint? You said it uses the GT35R compressor wheel but is the hotside a T4?
Carl,
If the hotside is a true T4 then that should explain why the PT61 pushes more HP than the standard GT35R, which is a T3 footprint.
See NYTs dyno, dead on with a typical 35R dyno. Unfortunately it is in MPH, not RPM, so hard to compare spool. My bet, they are VERY close, with a 61 costing hundreds less than the 35R. The 475 was not realized this time aroound, but never give up on NYT . Carl
#29
Lives on the Forum
I dunno if you guys know about this website...
http://www.jblmk3.com/id134.htm
Although it doesn't have some of the newer stuff, it's a very good guide on comparative sizing...
-Ted
http://www.jblmk3.com/id134.htm
Although it doesn't have some of the newer stuff, it's a very good guide on comparative sizing...
-Ted
#30
Rotary Enthusiast
iTrader: (1)
Originally Posted by Carl Byck
See NYTs dyno, dead on with a typical 35R dyno. Unfortunately it is in MPH, not RPM, so hard to compare spool. My bet, they are VERY close, with a 61 costing hundreds less than the 35R. The 475 was not realized this time aroound, but never give up on NYT . Carl
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
08-13-15 04:55 AM
rx8volks
Canadian Forum
0
08-11-15 10:30 PM