ErnieT

iTrader: (2)

Ray just called me. At only 32psi with the full bridgeport, my car made 735rwhp and thats not even fine tuned. It will still make more. My car may actually sprout wings! Thanks again to Ray Wilson for all the hard work, R&D he's done with my car.

turbotommy

iTrader: (3)

Awesome job!!

ErnieT

iTrader: (2)

Dyno sheet

crispeed

Come on! That's it!
You need to be over 760 to become a member of the elite club.

Ernie you sure have Ray working overtime. Best of luck. Can't wait to see the final results.

crispeed

Ah hah!.
You're starting to flat line the top end. Your wings are finally showing.
They won't be fully grown untill it's way over 9000rpm.

ErnieT

iTrader: (2)

Got more boost?! lol....Gonna take it higher tomarrow.

Here is what is nuts. At only 21psi, it made 581rwhp!!

crispeed

Carefull now. The dyno critics ar going to say it spiked the boost earlier on in the run.

BTW. Bridgeports suck.

Turblown

iTrader: (12)

Be interesting to see the overlay if you goto 35psi like you're SP engine.

Congrats, thats a ton of power. Pretty soon we'll see in the title " 800 "

dregg100

iTrader: (34)

how high are are you guys gonna turn the boost up? going for 800?????

Gorilla RE

iTrader: (1)

is this with your new intake manifold?

t-von

iTrader: (8)

In the words of Butthead.....Rotary's are cool...Uh uh uhuhuhuhuu uh! LoL!

ErnieT

iTrader: (2)

Not going to happen right now. A bridgeport take approx. 20% more fuel than a street port at the same boost level and Im out of fuel injector so it looks like I'll have to live with 735rwhp till I get larger injectors.
And this is on the stock upper and lower manifold.

hondahater

iTrader: (2)

Damn! Congrats! Now you need those bigger injectors and a gt45

justturbo2

iTrader: (4)

holy shitttttttttt great #'s ernie

gotboost?

great hp,good job!!

mr2foryou

That's exactly what I was gonna say cris. Where's RICE RACING? He'll definately be here shortly to try to talk crap about how your boost was higher and then tapered off, BLAH, BLAH, BLAH, etc. etc. etc.

On a more serious note, CONGRATULATIONS Ernie!!! That's awesome power right there for the boost level. You're going to keep upping the power before you ever get used to it, that you'll never get used to it. Nah, just playing man, I'm sure you'll handle it.

BRIDGE PORT FTW!!!

Dee E.

Zero R

iTrader: (1)

Ernie good numbers, should have a price for you tomorrow to help you even further

-S-

Zero R

iTrader: (1)

Yes it would as of right now from what I see he only gained minimal response over the SP. But definitely made better power with needing the psi

-S-

tearbo2

iTrader: (2)

And you say i'm building a beast..................... good job, .

Slammedblk7

iTrader: (7)

HOT DAMN! Welcome to the dark side.

RX7 RAGE

iTrader: (22)

woot!

showoff

ernie iam not taking a shot at you or anything(just wanna clear that up before hand) im just curious to why your focus seems to be on making more n more power instead of trying to learn and dial in the car and apply the power it had previously.. (6xx) it seems like in most of your posts after running the car@the track, the biggest thing problem(if you want to call it that) was that you were still learning the car....so do you plan to "learn" the car before you upgrade another 200hp? lol.. anywho congrads on the numbers ill be patiently waiting for the "i made 8xx" post..

-dj

crispeed

Ahhhhh! You got your wings clipped. Just a small set back that can be resolved easily.
I was wondering how you were fueling that motor because the level you're at right now I maxed 4 X 1600cc injectors. It's the higher rpm's that drive the duty cycle over the safe edge.

Trjackson

GAWD DAMN! Congrats on the new numbers!

Ty

ErnieT

iTrader: (2)

Thanks guys and no I won't put anymore power to the car until I learn to drive it, lol