Northern7

iTrader: (1)

Does anybody know the part number for the Apexi 3 bar map sensor? Secondly a good retailer who has them.

Thanks,

darkphantom

iTrader: (2)

any 3 bar map sensor will do

arghx

iTrader: (3)

whatever MAP sensor you use needs to be calibrated correctly. The AVC-R pressure sensor is not the same thing as the one that is normally used with the PFC. You can get a GM 3 bar sensor and plug and play connector from Banzai Racing

Northern7

iTrader: (1)

yes it will be used with pfc. I want direct plug and play. Will the apexi unit not work?

arghx

iTrader: (3)

For a plug and play solution you would have to get the Apex'i MAP sensor with the boost control kit, which is kind of expensive for what you get (a couple hundred bucks). And it was designed to be plugged into the side of the PFC with an additional harness.

for what it's worth though, from what i have found the MAP sensor is Denso part #DPS 310 2000a . It is the sensor used in D jetro conversions (speed density conversions) on Skylines.

Dudemaaanownsanrx7

iTrader: (23)

There is another plug and play option that i'm running. Its less expensive then the apexi. It's a 4 bar greddy. I did a write up on it several months ago. 2 of the wires need switched in the connector but it's very easy. I also calibrated the sensor and posted the correct scale and offset to be used with the black box datalogit. The part number and more information can be found in my thread. I'll post the link if you're interested or you can search for it.