Car:S4 87 rx7 turbo II

Ok so Im planning on pushing 10 psi nothing extream anyhow I got a custom manifold, 44mm tial wg and a garratte AR 50/63. The rest is stock. So I'm wondering what you guys suggest for an ECU. I searched and I'm thinking rtek 1.7 but I would like to hear other opinions also any other suggestions/mods to safley run 10 psi but how I said I'm not after anything extream just a nice weekend car. Thanks

 

problem is finding someone to tune that rtek, unless you do it yourself. search around in the engine management part of the forum you'll find plenty of info.

 

Haltech E8 PLugin if you want something easy.

Or a platinum sport 1000 if you dont mind doing some wiring.

That would be my recommendation.

 

Ok thanks alot guess I'll keep searching around.

 

The RTEK 1.7 might not be enough for your setup, go 2.1 if you want to be safe.

check out https://www.rx7club.com/rtek-forum-168/

I plan to run 10-14psi on a hybrid t04b turbo on 2.1 with pri 680, sec 1000cc injectors once I get a boost controller.

Good luck!