I am posting this thread to see if anyone has pics and/or tips to help me installed my trust f.mount. I you could also tell me the things i will have to relocate and modify to make this intercooler fit. One other thing, if anyone knows what piping kit is the best for the old school Trust front mount, it would help me out a lot. Thanks
-Cameron

 

Theres a few models, Most of the old school trst FMIC I have seen are for the FC .

If you post some measurements of your core, then it might be easier for somebody to give you some recomendations and post up some pictures.

 

theres a good thread with pics in the second gen section, search in this case is your friend

 

Ive posted pics in the 2nd gen section on how my piping went on from my HKS FMIC which is the same as the Greddy trust Old school FMIC kit.

try this link also..
https://www.rx7club.com/showthread.p...ght=trust+fmic

 

well i guess i gave the wrong impression using the words old school. I was merely referring to Trust as a less familiar brand named compared to greddy. To be more specific, the car i am installing it on is a 93 rx7 r1. Here is the link where you will find a picture of the intercooler i have purchased. Let me know.
https://www.rx7club.com/showthread.p...st+intercooler

 

this is one of the best intercooler ever produce by thrust/greddy. it does not require removal or cutting of the rebar. here are some pics of the original instructions. i can take pics of the intercooler mounted on the car if you need

 

more pics

 

even more pics

 

there that's all

 

Thanks for the feedback.