Nocab GT35/40 dyno update???
#1
Rotary Enthusiast
Thread Starter
Join Date: May 2002
Location: San Diego
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
Nocab GT35/40 dyno update???
Did you get that new pineapple motor in yet??? Any projected dyno runs in the near future? can't......wait.....much.............longer!!!
#2
03 Cobra Killer
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Chronos - Motor is in! Love it! Very strong! No dyno pulls yet, but I did take it down the track a few times shortly after it was broken in. Was on street tires because I was afriad of breaking something in the rear end so my ET's sucked, but I managed a 124Mph trap W nly 15.5psi. Push those numbers though a 1/4 trap to rwhp caclulator and I'm easily putting down 450rwhp @ 15.5psi...
I bumped the boost up to 17psi that day at the track to try for a 128Mph or so trap and smoked my ACT S/S clutch.
I'll definately be getting it on the dyno here in the next month or two, have some fuel related challenges to resolve first so I can make some 20+psi boost runs when I do get to the dyno ...
You can search around, I've done quite a bit of talking about the new motor and turbo setup...I'm suprised people have asked me to shut up already...
k
I bumped the boost up to 17psi that day at the track to try for a 128Mph or so trap and smoked my ACT S/S clutch.
I'll definately be getting it on the dyno here in the next month or two, have some fuel related challenges to resolve first so I can make some 20+psi boost runs when I do get to the dyno ...
You can search around, I've done quite a bit of talking about the new motor and turbo setup...I'm suprised people have asked me to shut up already...
k
#6
Rotary Enthusiast
Thread Starter
Join Date: May 2002
Location: San Diego
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
muah haha, the GT35/40 will never be beaten
thx for the heads up nocab, sorry I didn't dig a bit deaper in my searching
Cheers! Jason
P.S. Were you running a street port on the video vs the saleen?
P.P.S. Take as much more video of your car as possible!!! I gotta hear/see that turbo as close up as possible Bring the camera to dyno testing!
thx for the heads up nocab, sorry I didn't dig a bit deaper in my searching
Cheers! Jason
P.S. Were you running a street port on the video vs the saleen?
P.P.S. Take as much more video of your car as possible!!! I gotta hear/see that turbo as close up as possible Bring the camera to dyno testing!
Trending Topics
#8
03 Cobra Killer
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Chronos
[B]P.S. Were you running a street port on the video vs the saleen?
[B]P.S. Were you running a street port on the video vs the saleen?
k
#11
Well let me know what sort of numbers you come up with using this beast...You have a ported engine, correct? I'll have my maps sorted here shortly (getting very close to where I want to be and I'll forward them to Tony.
Michel
Michel
#14
Rotary Enthusiast
Thread Starter
Join Date: May 2002
Location: San Diego
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by nocab72
Yes, Pineapple Large Streetport.
Yes, Pineapple Large Streetport.
I was sort of hessitant to get even a small streetport on my pineapple rebuild because the one's I've heard sound kinda raspy...blat blat blat blat
#15
Chicharrones Rule!!
Join Date: Oct 2001
Location: Back In Austin
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
My Pineapple mild street port has a bit of lope, but it isn't all that bad, and I'm not completely convinced that I don't have other issues involved with that. Should get me closer to my 400rwhp mark w/ the RX6 though.
-E
-E
#16
03 Cobra Killer
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
As expected, the idle was VERY rough when I started the engine for the first time. Now that it is broken in, simply sounds mean as hell...
Need to get some new video footage of it shot and uploaded. @ WOT it sounds like any other open exhaust FD.
I posted a 1/4 mile pass on the new engine and exhaust...if you haven't seen it, let me know and I'll repost in this thread.
K
Need to get some new video footage of it shot and uploaded. @ WOT it sounds like any other open exhaust FD.
I posted a 1/4 mile pass on the new engine and exhaust...if you haven't seen it, let me know and I'll repost in this thread.
K
#18
03 Cobra Killer
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
At the track
http://flathat.woodstream.net/Columb...g/12.1@123.WMV (1.7M)
and I'm digitizing a cruise which you see me in quite a bit now...
K
http://flathat.woodstream.net/Columb...g/12.1@123.WMV (1.7M)
and I'm digitizing a cruise which you see me in quite a bit now...
K
#19
03 Cobra Killer
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Here is some video from a cruise across town from a few weeks ago...quite a few forum RX-7's in it...
Badog - Silver (wingless) FD
R-Magic - White FD
Rotarded - Black FD
mp5 - Montego Blue FD
nocab72 - Silver FD (first in camera @ 2:30)
Rigsby (donno his forum name) - Red FC (camera car)
Berto (donno his forum name) - Black FC
Luke (donno his forum name) - White 10th anniv
1Quik7 - sold his FD and that is is 99 Viper GTS shown in line at the beginning of the video...(I stomped all over him later that night on the freeway, no vid though... )
http://flathat.woodstream.net/Columb...ers_Cruise.WMV (28Mb)
K
Badog - Silver (wingless) FD
R-Magic - White FD
Rotarded - Black FD
mp5 - Montego Blue FD
nocab72 - Silver FD (first in camera @ 2:30)
Rigsby (donno his forum name) - Red FC (camera car)
Berto (donno his forum name) - Black FC
Luke (donno his forum name) - White 10th anniv
1Quik7 - sold his FD and that is is 99 Viper GTS shown in line at the beginning of the video...(I stomped all over him later that night on the freeway, no vid though... )
http://flathat.woodstream.net/Columb...ers_Cruise.WMV (28Mb)
K
#22
Banned. I got OWNED!!!
Join Date: Sep 2002
Location: Saint Louis
Posts: 2,092
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by nocab72
At the track
http://flathat.woodstream.net/Columb...g/12.1@123.WMV (1.7M)
and I'm digitizing a cruise which you see me in quite a bit now...
K
At the track
http://flathat.woodstream.net/Columb...g/12.1@123.WMV (1.7M)
and I'm digitizing a cruise which you see me in quite a bit now...
K
#23
03 Cobra Killer
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Here is a short clip back when I was still only running 10psi of boost...my car "squatting" when I punched it.
http://flathat.woodstream.net/Columb...0psi_squat.WMV (800k)
K
http://flathat.woodstream.net/Columb...0psi_squat.WMV (800k)
K
#24
Banned. I got OWNED!!!
Join Date: Mar 2001
Location: Bannished
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by nocab72
Here is a short clip back when I was still only running 10psi of boost...my car "squatting" when I punched it.
http://flathat.woodstream.net/Columb...0psi_squat.WMV (800k)
K
Here is a short clip back when I was still only running 10psi of boost...my car "squatting" when I punched it.
http://flathat.woodstream.net/Columb...0psi_squat.WMV (800k)
K
I usually end up hearing a "SHEEET" along with it, usually an echo of my own voice. Not in my car, mind you, but Nocab's, Rmagic's, and Jason's. When these cars are tuned, the squat is ON!
I have a new term for it. Instead of SPOT-ON TUNING, it's SQUAT-ON TUNING!