DriftDreamzSS

iTrader: (4)

So I finally brought my engine home and started bolting stuff on. Fresh streetported rebuild, 35r kit, spec stage 3 and ultimate fuel system from rx7store, aluminum flywheel from mazda trix, used re small v-mount. For what I want to do with the car I want quick quick spool above anything else, I hope the .82 T4 version of the 35r along with the porting will give me just that. Its been awhile getting everything together and im happy to finally see some progress towards getting my car out to the track.






just to see how far forward the turbo sat, still alot left to hook up. Yeah that coolant fill cap is

still have quite a few thing to finish, get some spacers so the top feed injectors fit properly (should these have came with my kit from rx7store?), make the fuel lines, bolt on the rest of the accesories, plumb the turbo lines, remove the rest of the sequential lines, cap stuff off and misc crap. Get some bolts that actually fit for the turbo.

GoodfellaFD3S

iTrader: (213)

Lookin' good, lots of nice shiny new parts . I think you'll be more than happy with the spool

I have a spare set of brand new injector spacers for the kgparts rail I can send you if you can wait until next weekend.

Jason

iTrader: (5)

Looks good

Yea our kits come with the spacers that go into the LIM. Is that what your talking about?

Jason

DriftDreamzSS

iTrader: (4)

Yeah, I guess they must have been left out of the kit I purchased from you?- the ultimate kit with both rails and stuff. Think you can send a set out my way? And the fpr that came with the kit has no gauge, is that normal?

TRISPEEDFD3S

iTrader: (26)

Very Nice!

DriftDreamzSS

iTrader: (4)

put in the engine/tranny today, still a long ways to go. I think im gonna order some nice oil/coolant lines for the turbo.

EZFD

aahhhh yes, brings back fond memories of my build over the summer, there's something soothing about getting all new parts. Looks great!!

MR2@20PSI

iTrader: (1)

Looks great man. Did you do your work I.E. porting and what not. If you didnt who did?

mr2foryou

Hey, my Ultimate Fuel kit came with the gauge for the FPR and I had injector clips also. Nice setup btw. I have the XSPower manifold as well. Good luck and I'm sure you'll be happy with the spool.

Dee E.

DriftDreamzSS

iTrader: (4)

Nah, my buddy did the porting and will be doing the tune on it as well.

DriftDreamzSS

iTrader: (4)

Hey, does anybody know the bolt size for the oil return fitting to the center section?

ihavetwins

iTrader: (5)

open waste gate huh thats gonna be really really loud. looks awesome.

eo2am

iTrader: (9)

hey Matt,

thats looking good. I know how you feel, I miss mine to. How did your port? Im thinking I should have the ports touched up and matched on the spare engine.

DriftDreamzSS

iTrader: (4)

nah, its gonna be re-routed. Im a fan of open gated cars if they spool late but ones that will hit full boost very quickly and very often open dump is just too much.

DriftDreamzSS

iTrader: (4)

I can put you in contact with him if you want, he is here in sb.

DriftDreamzSS

iTrader: (4)

got the intercooler and pipes back yesterday

eo2am

iTrader: (9)

so bro your still working on the car?