Need help ID'ing used turbo...
Thread Starter
Full Member
Joined: Mar 2001
Posts: 222
Likes: 0
From: Marietta, GA
Need help ID'ing used turbo...
The turbo is from an FC parts car.
Front cover is roughly the same size as the stock 2g Hitachi IHI-18, but has a small, raised rectangular box near the compressor outlet (no sticker in it), and is stamped "M27 B01".
The hot side is stamped "2N5S 975", and has a stock appearing internal wastegate, but the WG actuator is not stock and has sticker with "1900" on it. The turbine inlet is divided. Exhaust is std 3-bolt affair.
Will disassemble next week and measure.
Any help, ideas, etc. are appreciated.
Thx,
Steve C.
Front cover is roughly the same size as the stock 2g Hitachi IHI-18, but has a small, raised rectangular box near the compressor outlet (no sticker in it), and is stamped "M27 B01".
The hot side is stamped "2N5S 975", and has a stock appearing internal wastegate, but the WG actuator is not stock and has sticker with "1900" on it. The turbine inlet is divided. Exhaust is std 3-bolt affair.
Will disassemble next week and measure.
Any help, ideas, etc. are appreciated.
Thx,
Steve C.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM