Need help ID'ing used turbo...
 

The turbo is from an FC parts car.

Front cover is roughly the same size as the stock 2g Hitachi IHI-18, but has a small, raised rectangular box near the compressor outlet (no sticker in it), and is stamped "M27 B01".

The hot side is stamped "2N5S 975", and has a stock appearing internal wastegate, but the WG actuator is not stock and has sticker with "1900" on it. The turbine inlet is divided. Exhaust is std 3-bolt affair.

Will disassemble next week and measure.
Any help, ideas, etc. are appreciated.

Thx,
Steve C.