My Greddy t-88 powered FD
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2004
Location: BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
My Greddy t-88 powered FD
I thought I would post some pictures of my setup. Some things remain to be chromed, but overal she is done!
A lot of time and effort went into this project and I would like to thank Marko and his staff at Forcefed Performance.
I put down 425whp @ 14psi, and 455.2whp @ 17psi, enjoy the photos....
During the project....
http://i37.photobucket.com/albums/e9...7/IMGP0839.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0840.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0834.jpg
Finished Project....
http://i37.photobucket.com/albums/e9...7/f8165424.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0846.jpg
http://i37.photobucket.com/albums/e9...7/a6a00b74.jpg
http://i37.photobucket.com/albums/e97/olyrx7/oly2.jpg
Questions or comments welcome....
A lot of time and effort went into this project and I would like to thank Marko and his staff at Forcefed Performance.
I put down 425whp @ 14psi, and 455.2whp @ 17psi, enjoy the photos....
During the project....
http://i37.photobucket.com/albums/e9...7/IMGP0839.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0840.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0834.jpg
Finished Project....
http://i37.photobucket.com/albums/e9...7/f8165424.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0846.jpg
http://i37.photobucket.com/albums/e9...7/a6a00b74.jpg
http://i37.photobucket.com/albums/e97/olyrx7/oly2.jpg
Questions or comments welcome....
Last edited by olyrx7; 06-08-06 at 12:00 AM.
#6
_________________________
iTrader: (3)
If you haven't already, read my recent thread: https://www.rx7club.com/single-turbo-rx-7s-23/greddy-t88-compressor-wheel-word-warning-ppl-greddy-kits-545716/
I don't know what i'm going to do for a filter, but that greddy POS isn't going back on.
I have pretty much an identical set up as you besides the EMS. Looks good!
I don't know what i'm going to do for a filter, but that greddy POS isn't going back on.
I have pretty much an identical set up as you besides the EMS. Looks good!
Trending Topics
#8
Senior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2004
Location: BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone, I appreciate it!
The car was built for drag racing, but it's becoming a very "enjoyable" daily driver.
Zinx: I hear you on the Greddy filter, but I know that you can get a custom K&N filter that will fit.
The car was built for drag racing, but it's becoming a very "enjoyable" daily driver.
Zinx: I hear you on the Greddy filter, but I know that you can get a custom K&N filter that will fit.
Last edited by olyrx7; 06-08-06 at 03:28 PM.
#10
Senior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2004
Location: BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by eriksseven
Very, very nice... Are you going to keep the boost at 17psi max. in the future? Either way, I'm sure 450whp is good enough for most people.
Any chance you have a copy of your dyno-sheet you can post up?
Any chance you have a copy of your dyno-sheet you can post up?
The boost will be going up next year to around 25-27psi. I will need to run two external pumps and I will be running a custom intercooler.
I don't have a scanner, but I will try to take a picture of the dyno sheet with my digital camera.
#12
I brake boost
Join Date: Aug 2003
Location: Orlando
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Nice car but I can't help but think that with your ported engine and a T88 you should be able to squeeze more power then 455 @ 17psi. Not flaming at all, just stating what most people out there will think.
#13
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by FD Rey
Nice car but I can't help but think that with your ported engine and a T88 you should be able to squeeze more power then 455 @ 17psi. Not flaming at all, just stating what most people out there will think.
Below are the numbers I have seen on average. Personally, I think he should be happy with those numbers.
Boost- HP
10 psi-350-400
15 psi-450
20 psi- 500
25 psi- 550
30 psi- 600
Anthony
#14
Senior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2004
Location: BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
One of the main reasons I did not put down more HP is because I'm only running the Greddy 2 row intercooler. Thats all that I had at the time so I used it. Plus the intercooler was getting extremely heat soaked, temp outside that day were 30 celcius.
I appreciate the opinions, I really feel that with a 4" core intercooler I can reach 450whp @ 14psi. For know I will have to settle for 425whp
I appreciate the opinions, I really feel that with a 4" core intercooler I can reach 450whp @ 14psi. For know I will have to settle for 425whp
#16
Senior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2004
Location: BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Here is the dyno sheet @ 17psi, sorry it's the best I could get with the digital.....
http://i37.photobucket.com/albums/e9...7/IMGP0863.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0862.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0863.jpg
http://i37.photobucket.com/albums/e9...7/IMGP0862.jpg