MY GOAL WAS MET 769rwhp !!!!!!!!
NO BS , I myself can't belive it last night @ protech performance in austin tx, raised the boost to 35 psi, this was done on a dyno jet w/ sae setting I am now
offical dyno queen, but I am now going after my next goal and that is to run faster than 9.27 stay tuned will post dyno sheet and video after HIN here in austin tx, we will be on the rollers again today @ HIN so everybody can see for themselves that this is no BS a special thanks to hass @ PROTECH PERFORMANCE ari @ ROTARY PERFORMANCE brian "japan2la" for a great deal on the 13bre engine |
Post VIDEO!!!
|
Originally Posted by tearbo2
(Post 8085396)
NO BS , I myself can't belive it last night @ protech performance in austin tx, raised the boost to 35 psi, this was done on a dyno jet w/ sae setting I am now
offical dyno queen, but I am now going after my next goal and that is to run faster than 9.27 stay tuned will post dyno sheet and video after HIN here in austin tx, we will be on the rollers again today @ HIN so everybody can see for themselves that this is no BS a special thanks to hass @ PROTECH PERFORMANCE ari @ ROTARY PERFORMANCE brian "japan2la" for a great deal on the 13bre engine |
You can't do that and not post your setup!!!
:) Anthony |
Congrats Lee, great job!!!!!! I can't wait to see the vid!!!!!!!
|
i demand pics and vids!!!!!!!!!
|
Originally Posted by AnthonyNYC
(Post 8085543)
You can't do that and not post your setup!!!
:) Anthony https://www.rx7club.com/showthread.p...hlight=tearbo2 |
Congrats Lee...Now let's get that beast down the track!!!
|
Originally Posted by tearbo2
(Post 8085396)
I am now
offical dyno queen BTW. Never knew there were dyno queens in the rx-7 world but then again there's Ernie!!! :rlaugh: Are there any rules as to joining this dyno queen list! :lol: |
Originally Posted by Viking War Hammer
(Post 8085461)
ERNIET killa. :hahaha:
There's only one killa!!!! :rlaugh: |
There should be a new law. No posts about how much power you made without at least a picture of the dyno sheet, and what mods you have to your car. :D
Looking forward to the dyno sheet, list of mods, and videos. :) CJ |
Originally Posted by pp13bnos
(Post 8085792)
There should be a new law. No posts about how much power you made without at least a picture of the dyno sheet, and what mods you have to your car. :D
Looking forward to the dyno sheet, list of mods, and videos. :) CJ + 1!!!!!!!! |
Awesome job Lee. Ari said you'd be putting a whoopin on me soon, lol...Congrats get that thing back to the track!
|
Damn!!!!!
|
wtf is done to your car?
|
Awesome Lee! Hail the new rwhp street king!! and the titile has gone to a FC
|
Originally Posted by crispeed
(Post 8085663)
HEY!!!
There's only one killa!!!! :rlaugh: |
I also read that the motor had stock ports? Nothing ported anywhere? Anthony |
It's a 76mm turbo.
He can tell uou about the porting though. Impressive!!!!!! |
Yes, its true.. stock ports
|
Stock ports............. what in the name of all hillbilly's in tejas !
|
Originally Posted by Japan2LA
(Post 8086837)
Yes, its true.. stock ports
what wait ... what ? ? boom ... (the sound of my head exploding) Is this true? |
from his build thread. he ported the middle plate to match the stock secondary ports
PT74 GTS (74MM) |
good golly miss molly, that's almost as much as me
|
1 Attachment(s)
Originally Posted by mazgtr
(Post 8086945)
from his build thread. he ported the middle plate to match the stock secondary ports
PT74 GTS (74MM) No, thats not correct. If you have ever opened a Cosmo re block and looked at the Stock primary ports, you would notice that they are very small...smaller than all the other 13B turbo engines.. Lee matched the Cosmo Re port to S5 TII spec.. that is it.. nothing fancy at all.. Nothing else was touched on those Cosmo RE plates.. He is even running the same rotor housings he had on his previous S5 TII motor Go to the main thread listing specs and pics and you will see for yourself... Here is a pic of his setup..VERY BASIC |
All times are GMT -5. The time now is 08:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands