My BW S475 project... lots of pics.
#152
E85 Addict
Thread Starter
#153
E85 Addict
Thread Starter
was out for a ride yesterday for the first time.. boosting 22psi and it hits you pretty damn good... i had to add ~5% of fuel on top now with the 4" exhaust and new ic piping.
a big package is waiting for me at the postal office... will pick it up tomorrow... thanks enzo
a big package is waiting for me at the postal office... will pick it up tomorrow... thanks enzo
#155
E85 Addict
Thread Starter
Carnage!
YES!
have been running the car on the street for a couple of weeks with NO issues at all at 22psi.... got the car to the dyno tonight and did a reference pull to see where i was at.. didn't pay that much attention to boost since i was running the same setup as before, no changes..
all of a sudden boost is at 40psi at 5500rpm the wastegates just didn't want to open!!!!
now i got a big crack in my front iron and i lost 4 litres of oil that is now lying all over my engine bay..
saturday im taking everything apart to see if theres anything i can reuse..
ill throw in some pictures for ya when i got them..
no track for me this sunday....
have been running the car on the street for a couple of weeks with NO issues at all at 22psi.... got the car to the dyno tonight and did a reference pull to see where i was at.. didn't pay that much attention to boost since i was running the same setup as before, no changes..
all of a sudden boost is at 40psi at 5500rpm the wastegates just didn't want to open!!!!
now i got a big crack in my front iron and i lost 4 litres of oil that is now lying all over my engine bay..
saturday im taking everything apart to see if theres anything i can reuse..
ill throw in some pictures for ya when i got them..
no track for me this sunday....
#156
Ahh that sucks. What happened with the wastegate???? What kind is it...looks like the valve maybe stuck on the gate. I assume this is still the unit you got from my buddies at F.I.?? Are you sure you had the wastegate referenced to the bottom port and not the top port only??
#158
E85 Addict
Thread Starter
Ahh that sucks. What happened with the wastegate???? What kind is it...looks like the valve maybe stuck on the gate. I assume this is still the unit you got from my buddies at F.I.?? Are you sure you had the wastegate referenced to the bottom port and not the top port only??
it's funny you can lose attention just for one second and that is what it takes to blow everything to pieces.
Im not giving up... i think ill upgrade a few things
im actually pretty excited to see how she looks inside right now
#160
E85 Addict
Thread Starter
#161
Senior Member
iTrader: (1)
Join Date: Sep 2001
Location: San Francisco
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
This helps me though, since it's a somber reminder for me to establish an ignition/fuel cut above my target boost pressure...
What kind of apex seals are you running? I'd love to find out if they stayed intact...
#162
Chasing numbers
iTrader: (5)
Thats kinda wierd. I was at the drag strip last weekend. Got home swaped maps and fuels. Went for a ride the next day and the gate was not opening at all. I hit 1.38 bars! Thanks god a had a mix of fuel in the tank. I may go back to a proven Tial.... Sorry to here about the motor..
#164
E85 Addict
Thread Starter
everythnig exept the front iron is looking good, no dents, no broken seals!!
also checked my wastegates and they were fine... i found out that the boost reference hose to my bc was ripped off :/
pics.
also checked my wastegates and they were fine... i found out that the boost reference hose to my bc was ripped off :/
pics.
#169
"Elusive, not deceptive!”
#172
E85 Addict
Thread Starter
i've been running this engine setup for 3 years now and abused it alot..
the plate is and old reused one, it has over 80 000miles on it...
#173
"Elusive, not deceptive!”
Gus were you using the dowels on this build?
You have the housings reversed in the picture of the loose stack. The bores in the housings are hard to see in that area and you have regular bolts pictured in the rear plate.
Also were the apex seals flattened at all on the center of their faces where they cross the spark plug holes?
Barry
You have the housings reversed in the picture of the loose stack. The bores in the housings are hard to see in that area and you have regular bolts pictured in the rear plate.
Also were the apex seals flattened at all on the center of their faces where they cross the spark plug holes?
Barry
#174
E85 Addict
Thread Starter
Gus were you using the dowels on this build?
You have the housings reversed in the picture of the loose stack. The bores in the housings are hard to see in that area and you have regular bolts pictured in the rear plate.
Also were the apex seals flattened at all on the center of their faces where they cross the spark plug holes?
Barry
You have the housings reversed in the picture of the loose stack. The bores in the housings are hard to see in that area and you have regular bolts pictured in the rear plate.
Also were the apex seals flattened at all on the center of their faces where they cross the spark plug holes?
Barry
havn't had time to check closely on all parts yet..