my intention was to test both covers but as always there was no time... we had some trigger issues (my fault) that took to long time to sort out..

Nice! Cant wait to get my s475!

you will like it :)

this is not related to my car but i made a 12a header yesterday that will be on a 12a PP motor (rx7 fb), runners are 100% equal length... its mild steel and mig welded so nothing fancy but i thought i would share :)

http://transport.molnsatra.se/bil/header1.JPG
http://transport.molnsatra.se/bil/header2.JPG

What boost was that on the engine dyno? Still just a large streetport? What apex seals?

29,4psi, street port and RA 3mm

How much timing advance are you running if you don't mind me asking?

15deg 10 split

finally everything is coming together.. downpipe, wastegates and some wiring left.

http://transport.molnsatra.se/bil/2011/c.JPG
http://transport.molnsatra.se/bil/2011/b.JPG

anyone knows where i can find a filter for this sucker? it is 5.5" and has to be very short...
http://transport.molnsatra.se/bil/2011/a.JPG

http://afepower.com/shop/details_new...ter&brandID=61
I think you're going to have to shop at a diesel store to find one.

Thanks!!

nice to see you got it all back together and working smoothly.

you just need a sticker for the car to not stand in front of the turbo, small children might get sucked in..

I had a shorty implode on one of my 42r setups. Not really sure if it was a defective K&N unit or what but I think when you're dealing with a larger frame turbo you need more area when hitting 20+ psi.

chicken wire and a hose clamp!

well that does sound hokey, but it does work...

Peterbilt's have a formed 90 that would allow you to turn and get a filter to fit.

im running same size turbo with the borgwarner race cover and had to get my filter custom made

Where did you get it from?

Holy crap that's big

hey
i got mine made by these guys http://www.uniflow.com.au/ im pritty sure the have shops all over the world but yeh i just gave them all the measurements they made it to suit they did real nice job i can take it off and take pics of the inside if u like

the inside reinforcement is probably the most important, as it prevents the filter from collapsing into this black hole of a turbocharger.. you definitely don't want to run a inferior filter assembly.

Gustav, do you have any need? :-D

News! Fucking auto-spell...

Also heard something ;-) News!

oh... its in the drag racing section :-)

The car ran 9.95@146mph this weekend, im very happy after all hard work.

hmm.. need to fix all the pictures.. they are all gone!

all pictures up and working again :-)

So.. I just broke my faceplated tranny.. :/
Attachment 672632
Attachment 672633
Attachment 672634