MSD 6A Install on FD
#1
built my own engine
Thread Starter
MSD 6A Install on FD
I need help installing an MSD 6A on the leading coil on an FD
i'm ripping it out of an integra GSR so no instructions for me and a buncha cut cords
i'm ripping it out of an integra GSR so no instructions for me and a buncha cut cords
#2
Senior Member
iTrader: (4)
MSD information
If you have the box in your hand:
The left side have 2 small wire with connector ( you never need)
The right side you have 6 wire:
the heavy red and heavy black is ( to battery directly )
for the other 4 small:
red: to joint ( originally to coil + )
white: to joint negatif originally ( to coil - )
black: plug in your ( coil - )
orange: plug in your ( coil + )
The left side have 2 small wire with connector ( you never need)
The right side you have 6 wire:
the heavy red and heavy black is ( to battery directly )
for the other 4 small:
red: to joint ( originally to coil + )
white: to joint negatif originally ( to coil - )
black: plug in your ( coil - )
orange: plug in your ( coil + )
#6
MSD setup instructions
Go on the MSD website and click on techsupport email and tell them you're setup and they'll make you a wiring diagram for you're type of setup.
I've also been having what I think is ignition problems. One day I just started running like if it was running on one rotor. I checked the spark and I was getting a faint spark on the leading and a decent on the trailing. I just ordered two more SS blasters for the leading so I'll have a total of 4 MSD SS blasters, one for each sparkplug. Later I'll get a DIS 2 for the Leading and Trailing. Hopefully this is the problem. If not I'm stumped.
I've also been having what I think is ignition problems. One day I just started running like if it was running on one rotor. I checked the spark and I was getting a faint spark on the leading and a decent on the trailing. I just ordered two more SS blasters for the leading so I'll have a total of 4 MSD SS blasters, one for each sparkplug. Later I'll get a DIS 2 for the Leading and Trailing. Hopefully this is the problem. If not I'm stumped.
#7
Rotary Enthusiast
Join Date: Oct 2001
Location: Canada
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
Leading Coils
MSD Red to Stock Red/Black
MSD White to Stock Blue-Yellow
MSD Orange to both + on Coil
MSD Black to both - on Coils
Front Trailing Coil
MSD Red to Stock Red/Black
MSD White to Stock Red
MSD Orange to + on Coil
MSD Black to - on Coil
Rear Trailing Coil
MSD Red to Stock Red/Black
MSD White to Stock Blue/White
MSD Orange to + on Coil
MSD Black to - on Coil
MSD Red to Stock Red/Black
MSD White to Stock Blue-Yellow
MSD Orange to both + on Coil
MSD Black to both - on Coils
Front Trailing Coil
MSD Red to Stock Red/Black
MSD White to Stock Red
MSD Orange to + on Coil
MSD Black to - on Coil
Rear Trailing Coil
MSD Red to Stock Red/Black
MSD White to Stock Blue/White
MSD Orange to + on Coil
MSD Black to - on Coil
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM