MSD 6A Install on FD
 

I need help installing an MSD 6A on the leading coil on an FD

i'm ripping it out of an integra GSR so no instructions for me and a buncha cut cords

MSD information
 

If you have the box in your hand:
The left side have 2 small wire with connector ( you never need)

The right side you have 6 wire:
the heavy red and heavy black is ( to battery directly )
for the other 4 small:
red: to joint ( originally to coil + )
white: to joint negatif originally ( to coil - )
black: plug in your ( coil - )
orange: plug in your ( coil + )



:)

What if you are using aftermarket coils?

coil
 

No, i use the original leading FD coil.
No problem with this

o.k. but how does it hook up if you use aftermarket coils?

MSD setup instructions
 

Go on the MSD website and click on techsupport email and tell them you're setup and they'll make you a wiring diagram for you're type of setup.

I've also been having what I think is ignition problems. One day I just started running like if it was running on one rotor. I checked the spark and I was getting a faint spark on the leading and a decent on the trailing. I just ordered two more SS blasters for the leading so I'll have a total of 4 MSD SS blasters, one for each sparkplug. Later I'll get a DIS 2 for the Leading and Trailing. Hopefully this is the problem. If not I'm stumped.

Leading Coils
MSD Red to Stock Red/Black
MSD White to Stock Blue-Yellow
MSD Orange to both + on Coil
MSD Black to both - on Coils

Front Trailing Coil
MSD Red to Stock Red/Black
MSD White to Stock Red
MSD Orange to + on Coil
MSD Black to - on Coil

Rear Trailing Coil
MSD Red to Stock Red/Black
MSD White to Stock Blue/White
MSD Orange to + on Coil
MSD Black to - on Coil