With a 3rd gen do i connect the signal from the ignitor to the white wire on the msd or the purple and green wire? the manual says purple and green for a magnetic pickup or crank trigger. the white wire is for electonic ignition. which one do i use?

 

heres the schematic from msd

 

Leading Coils
MSD Red to Stock Red/Black
MSD White to Stock Blue-Yellow
MSD Orange to both + on Coil
MSD Black to both - on Coils

Front Trailing Coil
MSD Red to Stock Red/Black
MSD White to Stock Red
MSD Orange to + on Coil
MSD Black to - on Coil

Rear Trailing Coil
MSD Red to Stock Red/Black
MSD White to Stock Blue/White
MSD Orange to + on Coil
MSD Black to - on Coil

 

Thanks for the info it really helped. If the leading do 90% of the combustion than why do people use amps for the trailing coils?

 

to have an amp on every coil so they feel cool