Single Turbo RX-7's Questions about all aspects of single turbo setups.

More problems, need help. Searched

Thread Tools
 
Search this Thread
 
Old 09-08-05, 03:14 PM
  #1  
Rotary Freak

Thread Starter
iTrader: (2)
 
iceman4357's Avatar
 
Join Date: Jan 2004
Location: St.Louis
Posts: 1,879
Received 128 Likes on 72 Posts
Unhappy More problems, need help. Searched

I have read lots of threads, but im still wondering what is wrong. I just got the turbo back and put that on and it smokes a little less, but is gradually getting worse. The engine is a fresh rebuild with about 3,000 miles on it. I need to change the plugs since they are probably coated in oil from the turbo going out. I cleaned the intercooler piping and the intercooler out because there was about 1/2 a qt of oil in the intercooler from the turbo going out.

Now that i replaced the turbo with a fresh rebuilt one, i still get smoke on a new engine. It smells like oil and gas(no cats), and i have inspected my check valve comming from the oil filler cap. Another problem that i have is my coolant is starting to go a little crazy, the add coolant light comes on for about 30 sec and goes off. Sometimes the stock temp gauge will go up and suddenly drop within a matter of seconds. I think that my over-flow coolant tank might have a crack in it, because when i get on it coolant leaks out and gets sprayed on my windshield. The engine also is getting too hot for having a Koyo radiator. On the highway at 70 mph it still gets into the 104 range, then can drop to 89-94.

So now comes my question:
1.) Will a cracked overflow tank cause all of my coolant issues??


I will change and look at the plugs, and post pics to see if anyone can help diagnose.

Thanks
Eric
Old 09-13-05, 12:48 AM
  #2  
I live in an igloo

 
BlaCkPlaGUE's Avatar
 
Join Date: Jul 2004
Location: calgary alberta
Posts: 2,546
Likes: 0
Received 0 Likes on 0 Posts
You running an FD engine? All I can think of about the oil issue in the intercooler is that your oil pressure is too high for that turbo, and will need a restrictor. I've heard that sometimes if you don't use a restrictor and your getting oil into the intake with an aftermarket turbo, is that you can blow your oil seal on the turbo. Correct me if im wrong, but thats what I remember reading in this forum.
Old 09-13-05, 01:01 AM
  #3  
Banned. I got OWNED!!!
 
Alien's Avatar
 
Join Date: Feb 2003
Location: Right below Orions belt
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
blackplague, please stop offering advice. Thanks. Erics car has a dead coolant seal, his coolant is boiling over and his over flow looks like new orleans. His manifold is glowing bright read at idle. His base timing is between 0 to -2 at idle. Why rx7 store set it up like that is beyond me. The coolant on his windshield is from his t housing cap blowing off.
Old 09-13-05, 07:39 AM
  #4  
The one
iTrader: (5)
 
Jason's Avatar
 
Join Date: Jul 2001
Location: Fort Worth, TX
Posts: 3,862
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by Alien
blackplague, please stop offering advice. Thanks. Erics car has a dead coolant seal, his coolant is boiling over and his over flow looks like new orleans. His manifold is glowing bright read at idle. His base timing is between 0 to -2 at idle. Why rx7 store set it up like that is beyond me. The coolant on his windshield is from his t housing cap blowing off.
Eric is bringing his car to us in a couple of weeks so we can see what is exactly wrong. Not sure why his base timing would be at 0. I dont change any of the timing in vacuum from the base map on the power fc.

Jason
Old 09-13-05, 04:12 PM
  #5  
Rotary Freak

Thread Starter
iTrader: (2)
 
iceman4357's Avatar
 
Join Date: Jan 2004
Location: St.Louis
Posts: 1,879
Received 128 Likes on 72 Posts
Originally Posted by Jason
Eric is bringing his car to us in a couple of weeks so we can see what is exactly wrong. Not sure why his base timing would be at 0. I dont change any of the timing in vacuum from the base map on the power fc.

Jason
Cant wait to get this solved....until then i blow white smoke like a god damn stunt plane. And while im up there, im going to install a 3 bar, and maybe we can try cranking the boost up and laying down some numbers jason??
Old 09-14-05, 10:40 PM
  #6  
It has begun

iTrader: (20)
 
lane_change's Avatar
 
Join Date: Feb 2002
Location: Houston, TX
Posts: 3,393
Received 17 Likes on 5 Posts
Damn man, sucks to hear about this....but I do know that your 119mph trap speed was not indicative of a car making 400+whp with a T78 running 15-16psi....not when my little 60-1 making 350whp is trapping at 118mph.

Hopefully it's not the motor, but then again, hopefully it will be something obvious, motor or not, that way it can be repaired and you can get on with enjoying your car. Small stupid unknown problems are absolutely hell. Good luck with it all.
Old 09-15-05, 03:20 PM
  #7  
Rotary Freak

Thread Starter
iTrader: (2)
 
iceman4357's Avatar
 
Join Date: Jan 2004
Location: St.Louis
Posts: 1,879
Received 128 Likes on 72 Posts
yea...i wilbe in ohio next weekend to tear it down and see what the **** is going on.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZacMan
Build Threads
4
09-19-15 09:20 PM
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM



Quick Reply: More problems, need help. Searched



All times are GMT -5. The time now is 09:25 PM.