So spring is here and we finally got my brothers FD back up and running.

He's got a streetport GT35R. We decided to see how far we could go with the GT35R before it runs out of steam. Well it didn't take to much. lol.. 24psi and that's all she wrote. It did however make 511hp. It made 455hp at around 16psi.

Enjoy the pics...

 

We decided to turn the boost down a bit and run it at 21psi.

The turbo wasn't doing much past it anyway...

 

very impressive and on a dyno dynamics!! that is well over 500 on a dynojet!

 

what size turbine?

 

Hmmm that is interesting. Look at how low the torque is, 250ish ft lbs. I made more than that with a 50 trim To4E! I would be curious to see what the car runs in the 1/4 mile. HP numbers are certainly impressive don't get me wrong, thanks for sharing.

 

Looks more like 380ft/lbs to me. Are you reading it wrong?

Steve

 

MAN, thats awesome!

500HP on a T3

 

I have already converted it to a dynojet number...
It made 435hp dyno dynamics

 

1.06

 

It made about 410 ft lbs on the 511rwhp run. Yes, I am curious to see what it will do down the 1320 as well.. Your right numbers are not everything. Thats why im more concerned about the power curve.

I have a few videos I will post up later on today.

 

if you made that power on pump gas with a T3 and streetport I am excited to get the numbers on my T4 long-runner and streetport at 15psi

 

here are a few videos I posted on Youtube.

http://www.youtube.com/user/nitrofed7

 

Dyno Dynamics are heart breakers. It's a known fact for anyone who's worked with them. We've seen them read consistently 20% lower than DynoJet. Those numbers have been backed up at the track.

 

Whoever it was that made 511 whp on the T3, Big Congrats ! That should be a tire shredding machine !

 

Can any mods delete this guy's posts so we could continue like mature adults...

 

Consider it done sir. Posts were out of line, thread has been cleaned. No bullshit arguing.


~S~

 

congrats enzo, anthony and baggi. i wish i could have been there, but you guys picked the one day i'm running late to actually finish up early..

now anthony, get at gt40 on there and join the 600wrhp club, the air is nice up here

 

Thank you very much sir!!!

 

Thanks Roan... Were gonna run the rest of the year like this... Anthony needs to drive this thing since it's been sitting for so long..
Over the winter we'll join that 600hp club.

 

You'll probably be around the same power at 15psi (400~450)
The difference in your setup is that you'll be able to run bigger boost and not be held back due to the small T3 housing. I would expect you should be capable of 550~600hp.

 

Would like to get one of my T4's on that car and have you tune it for a dead on comparison from a unbiased source, not saying I'm biased but I'm sure people view it that way. Nice job, also I bet the car is about as fun a street car as you can get. Is the WG open or re-routed?


~S~

 

WG is open. The manifold is actually one of yours. very old school. I got the kit from you without the turbo maybe 4-5 years ago.

 

Do you think the boost comes on a little late? It looks like things don't really start getting going until 4600rpm or so. I'd think with a T3 1.06 you should see that boost 500rpm sooner. Is there a reason for that or am I missing something?

-Andy

 

What kind of injectors you have, if I may ask.

 

1000cc prim and 1600cc sec.