i have a greddy log manifold and need to know if the HKS standard wastegate (40mm) would bolt up to this?

i know its really a 32mm but i was going to port it out

 

Greddy and HKS = competitors...hmm...I have no idea

 

WE KNOW THIS ALREADY THANKS..

 

Use a caliper and measure the bolt hole to hole centers, and outside flange dimensions and I'll tell you if a hks 40mm will bolt up.

 

i dont have a caliper but my on the greddy its 6.5mm hole to hole and flange is about 7.5mm L and W. but if i gofrom the inner measurment the whole are about 2" apart. he said the gate Lenght wise, the base is 3 inches and with wise bolt to bolt is 2 inches