Keep the PVC or Not?
06-26-08, 02:29 AM
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2002
Location: FL
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
Keep the PVC or Not?
When converting to single to you keep the PVC or do you cap it off? I see that it hooks up to the UIM to oil filler neck, and the manual shows it running to the intake ? Could i just run it to the oil filler neck and be ok?
What does the two ports on the oil filler neck go to? One to the PVC, what does other go to (air filter)? My single turbo doesn't have any ports before the compressor. So should i cap all it off?
What does the two ports on the oil filler neck go to? One to the PVC, what does other go to (air filter)? My single turbo doesn't have any ports before the compressor. So should i cap all it off?
06-26-08, 09:58 AM
#2
Will work for horsepower
You mean pcv and you can eliminate it and go with a vented catch can! I run a vented catch can becouse i dont want crank case gasses run back into the intake.
06-27-08, 10:55 PM
#3
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
NeCr0mStR
2nd Generation Specific (1986-1992)
9
03-24-06 05:19 PM
kevino
2nd Generation Specific (1986-1992)
9
05-18-05 05:52 PM