just a question
#3
UMMM first off psi doesn't = the same flow. If you were to put that on and ran it at the same "boost" you will probably run lean and blow your motor. A bigger turbo will push more air at the same boost level. It's pointless to put it on unless you do the supporting mods...
#4
Rotary Enthusiast
iTrader: (3)
Join Date: Jan 2007
Location: st. louis
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
get yourself a:
standalone
bigger injectors
new fuel pump
front mount
free flowing exhaust
better radiator
some AI if you are running higher boost
your motor is gunna go kablamo if you try cranking up the boost.
standalone
bigger injectors
new fuel pump
front mount
free flowing exhaust
better radiator
some AI if you are running higher boost
your motor is gunna go kablamo if you try cranking up the boost.
#6
well on an fd you might get away with 10psi on that turbo, I really wouldn't do it without at the very least upgrading the injectors and fuel pump... for some reason I thought the OP had an fc.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM