im having a debate with myself about what injectors to buy, im goingwith injector dynamic. my question that i have is that id750 and id1000 is going to be enough for my street ported turbo II motor with a greedy TDO6/60-1 hibrid at 15 psi? right now i have RC 550 and 750 and they litterally max out at 9 psi at 7500 rpm and i know this setup have more. i need opinions please thanks

eddie

 

Anybody?

 

get the ID 1000 for the primarys and ID2200 for the seconderys. this way you'll have enough fuel for any furture upgrades . plus the ID1000 will idle like stock

 

^Great setup. However, if he's not planning on upping the turbo size possibly a bit overkill. I run 4xID1000's on my FD with great drive ability and enough fuel for nearly 400whp.

 

No, i just got my greddy done by bnr in january im not planning to upgrade for a while.

2a+RoN, what ems you are using? 1000 cc injectors sound over kill for primaries

 

I have a BNR stage 3 and I am just about maxing my 1000's out on that setup.
I have gone ahead and purchased 1000/2000 ID's..(and a T04s..etc.)
Reason for the 1000's is that they are tunable as primaries.So I have heard.Very close to the 725's.

 

Worst thing to do is to NOT buy the part that can support 100-200 more hp becuase it is 20 bucks more. Than a few months down the line that part might be the horsepower bottleneck in your setup. For me it was 850cc and 1000cc.. with a walbro fuel pump. then 850 cc 1200cc with denso 300 and an aeromotive fpr... then it was 850 and 1600 with a bosch 044... Buy once and then never worry about it again.

 

725/2000 id enough fuel for future upgrades.