how much power?
#1
Junior Member
Thread Starter
Join Date: May 2009
Location: Buffalo, ny
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
how much power?
ok i just bought a members car...
https://www.rx7club.com/members/1991-turbo-ii-131242-albums-pictures-my-1991-rx7-turbo-original-also-sale-893/
i was wondering how much hp this could have with a good tune..
Specifications:
-Made in Japan- FC3S
-126,572 original miles 2 door 5 Spd
-Aggressive Street ported 13B motor w/ Brand new RX8 3MM Apex Seals. $800
-Haltech E6X ECU w/ injector harness $2000
-Greddy Intercooler 24v & all piping $1000
-Greddy Trust Full Turbo Back Exhaust $1000
-ACT Six Puck Clutch, practically brand new. Only 2,000 miles $600
-880 primary, 1600 secondary injectors
-Momo original steering wheel. (very rare)
-Blitz blow off valve.
-Paxton fuel pressure regulator
-Auto Meter air fuel and boost gauge.
-Razo pad kit
-Third generation rims.
https://www.rx7club.com/members/1991-turbo-ii-131242-albums-pictures-my-1991-rx7-turbo-original-also-sale-893/
i was wondering how much hp this could have with a good tune..
Specifications:
-Made in Japan- FC3S
-126,572 original miles 2 door 5 Spd
-Aggressive Street ported 13B motor w/ Brand new RX8 3MM Apex Seals. $800
-Haltech E6X ECU w/ injector harness $2000
-Greddy Intercooler 24v & all piping $1000
-Greddy Trust Full Turbo Back Exhaust $1000
-ACT Six Puck Clutch, practically brand new. Only 2,000 miles $600
-880 primary, 1600 secondary injectors
-Momo original steering wheel. (very rare)
-Blitz blow off valve.
-Paxton fuel pressure regulator
-Auto Meter air fuel and boost gauge.
-Razo pad kit
-Third generation rims.
#4
Junior Member
Thread Starter
Join Date: May 2009
Location: Buffalo, ny
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
so?? nothing u guys said had a point...the body is fine...its all smooth needs 2 be painted my friends are body specialists..the car idles like it was streetported and its sounds like a ******* monster.....i paid 2k for this car lol
#5
F**K THE SYSTEM!!
TO answer your question..
IM assuming u have the stock turbo on a streetported block. With ALL Supporting mods.
Id say u can make 260-300 on that turbo.(depends on tuner)
IM assuming u have the stock turbo on a streetported block. With ALL Supporting mods.
Id say u can make 260-300 on that turbo.(depends on tuner)
#6
Crash Auto?Fix Auto.
iTrader: (3)
So its stock turbo yes??
None of the pictures show anything turbo related.
If so, he must've had BIG plan with the injector combo. You pretty well won't even need those 1600's on the stocker
Most I've personally witnessed on a stock turbo FC was 250whp/250(ish)ft/lbs on a mustang dyno......so somewhere in there.
Also as Rich mentioned it can't have RX-8 apex seals.
None of the pictures show anything turbo related.
If so, he must've had BIG plan with the injector combo. You pretty well won't even need those 1600's on the stocker
Most I've personally witnessed on a stock turbo FC was 250whp/250(ish)ft/lbs on a mustang dyno......so somewhere in there.
Also as Rich mentioned it can't have RX-8 apex seals.
Trending Topics
#13
YAY! No more smoke!
iTrader: (2)
Join Date: Aug 2007
Location: OC, California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Well seeing as you haven't answered the single most important question asked regarding YOUR question, it doesn't surprise me. Let me lend a hand from someone with less and a gazillion posts. Riddle me this batman :
What turbo is your car running?
A:stock (big cast brick manifold/internal wastegate/small hardline on compressor cover/3 bolt downpipe)
B:Hybrid (big cast brick manifold/internal wastegate/maybe markings on compressor such as series or manufacturer [60-1, T04B, Turbonetics etc.]/ 3 bolt downpipe)
C:Aftermarket (cast or tubular but defined runners/MOST likely external wastegate/4 bolt or v-band downpipe)
D:Phone a friend to come take a look.
Hope this helps
(if I'm off at all, by all means correct me)
What turbo is your car running?
A:stock (big cast brick manifold/internal wastegate/small hardline on compressor cover/3 bolt downpipe)
B:Hybrid (big cast brick manifold/internal wastegate/maybe markings on compressor such as series or manufacturer [60-1, T04B, Turbonetics etc.]/ 3 bolt downpipe)
C:Aftermarket (cast or tubular but defined runners/MOST likely external wastegate/4 bolt or v-band downpipe)
D:Phone a friend to come take a look.
Hope this helps
(if I'm off at all, by all means correct me)
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM