what should have been a no-brainer this morning has turned into a real head scratcher. i assumed that the techedge 1.5 rs232 would have a wideband 0-5 v outlet that would wire to the aux port on my datalogit. but no. where the heck do i get the WB output from techedge to wire to the datalogit? i double checked the techedge inx sheet, searched both techedge, datalogit and forum archives and came up short. (obviously it must be there somewhere)... thanks in advance for any help. i posted this on the power fc forum but haven't received a reply so hopefully i will here w a wider audience.
howard coleman

 

here is the link:
http://groups.yahoo.com/group/Datalo...Sensor%20Mods/

the info is from Max Cooper, thanks Max. If the link doesn't work, go to the FD3S datalogit group/files/fuel folder. I think this was for Ver 1.0, but it may get you started.

 

http://techedge.com.au/vehicle/wbo2/1v5/techo.htm

I think this is pretty clear. BTW the pinouts are the same on 1.0 and 1.5 so you could follow Max's instructions.