Does anyone have a problem with their t-78 sitting to high? For some reason my t-78 with the pipes hit the damn hood when closed... Manifold is on tight as well as the turbo... anythought.. suggestions..

thanks

 

Move your a/c lines that the housing is hitting. Pop the lines out of the clips, remove the clips, and push/bend the lines down and turn the housing as far as you can counter clockwise. (from the front of the car)

 

Let me use it for a few weeks and I'll let you know.

 

Thanks.. i'll try tha but i didn't think that the hoses where stopping it that much.. thanks again...


I"ll let you borrow it glass man.. i'll just need a nonrefundable deposit of 3000..

let me know..

 

I didnt either but It was just enough!

 

You can cut the output tube to get more clearance, make sure you have some sort of lip to keep the hose from popping off.

 

Ive installed this turbo kit many times..here are some pointers to gain clearance
1. Move A/C lines
2. Clock the compressor housing
3. Cut the outlet pipe


good luck!

 

Thanks for all the reply, everyeone has been very helpful.