Ok here is the whole story. The car when i bought it had bad turbos. So I bought a KKK stage one kit. A power FC and 1300 cc injectors and a Apex FMIC. So i get the whole this assembled and go to fire it wont fire. Im getting spark and Im getting fuel I think. When i had the plugs out it was spitting something out the plug port. IT smelled like gas so i assume im getting fuel.
I got it to fire once for a bout a min but was putting out solid white smoke. It took a soild 2-3 min of cranking. The motor was shaking so had it felt like it was gonna come out.
Any suggestions what it might be wrong any help would be appricated. Thank you

 

Good news after turning it over for what seems like an eternity. It starts wont hold a idel but I think that just needs to be adjusted. But i am still smoking like a train. Its white. OK here is one i cant get past 4 grand. but im runnig upgraded secondaries on on stock ECU. I have the PFC but have been trying to eliminate my variables.
PLease HElp.

 

doesnt sound good. What happens after its all warmed up?

 

Still smokes like mad

 

I assume you checked the Boost sensor (MAP) vacuum line at both ends....Right?

 

yep its good

 

Does the smoke smell like gas?

 

yes.

 

To me it seems like you're running very rich. Have you tried comparing your PFC settings to those of other people? I'm assuming you got everything from SR Motorsports. I once bought a TEC II from them, and the base map they gave me had my secondaries running 100% of the duty cycle of my primaries. When I got it started it looked like my yard was on fire.

 

I have no one in my area to help me. Is there any way you could send me a base map or what should i do??
No one here tunes them I know of. No one has a modded one I kn ow of either.

 

Check out the Power FC forum. It's a subsection of the ECU forum.

 

Thanks for all the help. Turned out to be a broken injector housing leaking fuel stright into the engine. Thanks anyway.

 

Well, that's the first time I ever heard of that one.