I'm enclosing an attachment., seems to be an oil restrictor, and idea where i can get one, what diameter the hole is, and what threads on both sides. Anyone make one? where? Mine snapped in two...


Thanks,
Rob

 

Yes it is an oil pressure restrictor. I know that it is a standard fitting, so you should be able to obtain them from any supply house that carries AN fittings. There are two of them one is on the T/C (Turbocharger)side and is part # 8604-1104 (AN4-M10xP1.5). The other is for the E/G (engine) side part # 5904-0230 (AN4-M14x P2.0).

 

lol when i got my rx6 kit that part was stripped. even though the fitting is a standard size the restrictor hole in it is not. you need the little hole because of the ball bearing. the only place i found that had it was apexi japan. its like 12 bucks for it. and it took like 2 months for it to arrive. I talked to Mas at apexi usa and he ordered it for me. if you call him he should know what it is that you are looking for.

 

wow... that sucks... anyone happen to know what size the restrictor hole is? I made a fitting, but am going to use a drop-in holley carb restrictor (the jets), just need to know what zies. I've got a 66 in there now...

 

i am using holley jets now. i need a .025 oriface but holley doesnt go that low.

 

what size are you using? How did you fit it in exactly? I'm using a 64 now, and I am not blowing oil out the BOV anymore...

 

That's a SS 45acp 1911 mag

I sell them at the shop

 

hmm? I think maybe you posted in the wrong forum, but i could use some mags for my commander.

 

yeah it did suck i called earl's north america, aeroquip, summit racing... no one i found had it. stupid metric parts in a non metric country. if you find a state side source for it let us know. i wouldnt mind having an extra one incase i mess this one up.

 

you can find the fitting... pretty easily, you just have to take it to a welding shop, or maching shop and have them brazen the top and then drill a small hole.... otherwise, like apexkw said, you'll have to order one from apexi.....

 

well, i found a machine shop to make mine... steel, but it cost me $90.00 Well, the money i've already spent trying to get one, this isn't that bad....

 

holy crap $90... i think the local shop said $50 with a an fitting