Help.. apexi rx6 guys... what is this/where to buy?
I'm enclosing an attachment., seems to be an oil restrictor, and idea where i can get one, what diameter the hole is, and what threads on both sides. Anyone make one? where? Mine snapped in two...
Thanks, Rob |
Yes it is an oil pressure restrictor. I know that it is a standard fitting, so you should be able to obtain them from any supply house that carries AN fittings. There are two of them one is on the T/C (Turbocharger)side and is part # 8604-1104 (AN4-M10xP1.5). The other is for the E/G (engine) side part # 5904-0230 (AN4-M14x P2.0).
|
lol when i got my rx6 kit that part was stripped. even though the fitting is a standard size the restrictor hole in it is not. you need the little hole because of the ball bearing. the only place i found that had it was apexi japan. its like 12 bucks for it. and it took like 2 months for it to arrive. I talked to Mas at apexi usa and he ordered it for me. if you call him he should know what it is that you are looking for.
|
wow... that sucks... anyone happen to know what size the restrictor hole is? I made a fitting, but am going to use a drop-in holley carb restrictor (the jets), just need to know what zies. I've got a 66 in there now...
|
Originally posted by rjuge wow... that sucks... anyone happen to know what size the restrictor hole is? I made a fitting, but am going to use a drop-in holley carb restrictor (the jets), just need to know what zies. I've got a 66 in there now... i am using holley jets now. i need a .025 oriface but holley doesnt go that low. |
what size are you using? How did you fit it in exactly? I'm using a 64 now, and I am not blowing oil out the BOV anymore...
|
That's a SS 45acp 1911 mag :D
I sell them at the shop |
hmm? I think maybe you posted in the wrong forum, but i could use some mags for my commander.
|
yeah it did suck i called earl's north america, aeroquip, summit racing... no one i found had it. stupid metric parts in a non metric country. if you find a state side source for it let us know. i wouldnt mind having an extra one incase i mess this one up.
|
you can find the fitting... pretty easily, you just have to take it to a welding shop, or maching shop and have them brazen the top and then drill a small hole.... otherwise, like apexkw said, you'll have to order one from apexi.....
|
well, i found a machine shop to make mine... steel, but it cost me $90.00 Well, the money i've already spent trying to get one, this isn't that bad....
|
holy crap $90... i think the local shop said $50 with a an fitting
|
All times are GMT -5. The time now is 08:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands