I'm looking for info on where to get the oil lines to run the 20G on my s4. They were not included in the kit involved. If anyone can help out or show me their custom setup I would greatly appreciate it.

 

I have seen the kit on the S4 piggy back the stock hardline to turbo ( feedside ) and then a rubber return to the front cover.

Also seen a SS line from the front iron ( same stock position as stock oil feed) to the turbo . and a SS turbo return.

I should still have my lines from my old tdo6 kit, ill see if i can snap the pictures

 

That would be great. I have the top feed line figured out. It is just the bottom drain. I don't know the specifics for what type of flange is on the turbo and on the front cover.

Sorry if this seems elementary, this is my first turbo swap so I'm learning the hard way.
Would something like this work?

Turbo Oil Drain Line Kit 20in 10AN MHI TD04 T005 TD06

 

my greddy tdo6 have a big long hard line coming from the turbo down to almost to the cover with just a section of high heat hose going from it to the adapter on the front cover. i'm sure you might be able find something similar on ebay