MickeytFC

iTrader: (1)

I'm looking for info on where to get the oil lines to run the 20G on my s4. They were not included in the kit involved. If anyone can help out or show me their custom setup I would greatly appreciate it.

MickeytFC

iTrader: (1)

I have the top feed line figured out. It is just the bottom drain. I don't know the specifics for what type of flange is on the turbo and on the front cover.

Sorry if this seems elementary, this is my first turbo swap so I'm learning the hard way.
Would something like this work?

Turbo Oil Drain Line Kit 20in 10AN MHI TD04 T005 TD06

ruddyrid

iTrader: (8)

More than likely yes, not 100% sure about the length being sufficient to reach from the turbo drain to the front cover but flanges should be appropriate.

You can also piece it together and find out yourself how long the hose will be, will require that you find Turbo Drain Adapters [probably with -10AN fittings], and create a length of hose with the appropriate [-10AN] ends to bolt onto your drain adapters.

BTW, do you have an S4 or S5 engine [front cover]?

MickeytFC

iTrader: (1)

The engine is 100% S4. Are drain flanges generally the same size?

KompressorLOgic

iTrader: (6)

you could measure the stock drain, then order the same size,

I have IHI rhc7 and for a drain I ran a thick hose rated for high pressure oil/gas to the stock drain pipe with the flange cut off and it works fine.

I'm pretty sure we have talked in person as well lol...

MickeytFC

iTrader: (1)

Yeah definitely! I'm busting my butt trying to finish the car before I move back to NM.