efr 7670
#3
Rotary Freak
iTrader: (7)
Read the EFR manual here:
http://www.full-race.com/articles/efrturbotechbrief.pdf
The coolant ports are M14 to 6AN.
The oil drain uses a narrow bolt pattern (1.5" bolt centers) OR you can use 3/8" NPT which it comes pre-threaded for.
Most auto parts stores stock Dorman PN: 56152. It's $6 and is a 3/8" NPT to 5/8" hose barb for if you plan on using 5/8" silicone hose. Or you can buy the correct narrow AN drain adapter or 3/8" NPT to 10AN fitting if you plan on using braided line.
The turbo already comes with a 4AN feed, just make a 4AN line to fit.
http://www.full-race.com/articles/efrturbotechbrief.pdf
The coolant ports are M14 to 6AN.
The oil drain uses a narrow bolt pattern (1.5" bolt centers) OR you can use 3/8" NPT which it comes pre-threaded for.
Most auto parts stores stock Dorman PN: 56152. It's $6 and is a 3/8" NPT to 5/8" hose barb for if you plan on using 5/8" silicone hose. Or you can buy the correct narrow AN drain adapter or 3/8" NPT to 10AN fitting if you plan on using braided line.
The turbo already comes with a 4AN feed, just make a 4AN line to fit.
#5
Read the EFR manual here:
http://www.full-race.com/articles/efrturbotechbrief.pdf
The coolant ports are M14 to 6AN.
The oil drain uses a narrow bolt pattern (1.5" bolt centers) OR you can use 3/8" NPT which it comes pre-threaded for.
Most auto parts stores stock Dorman PN: 56152. It's $6 and is a 3/8" NPT to 5/8" hose barb for if you plan on using 5/8" silicone hose. Or you can buy the correct narrow AN drain adapter or 3/8" NPT to 10AN fitting if you plan on using braided line.
The turbo already comes with a 4AN feed, just make a 4AN line to fit.
http://www.full-race.com/articles/efrturbotechbrief.pdf
The coolant ports are M14 to 6AN.
The oil drain uses a narrow bolt pattern (1.5" bolt centers) OR you can use 3/8" NPT which it comes pre-threaded for.
Most auto parts stores stock Dorman PN: 56152. It's $6 and is a 3/8" NPT to 5/8" hose barb for if you plan on using 5/8" silicone hose. Or you can buy the correct narrow AN drain adapter or 3/8" NPT to 10AN fitting if you plan on using braided line.
The turbo already comes with a 4AN feed, just make a 4AN line to fit.
thank you!
Thread
Thread Starter
Forum
Replies
Last Post
Tdskip
1st Generation Specific (1979-1985)
15
03-03-16 07:41 AM