efr 7670
 

just got my efr 7670 1.06 turbo external wg


does anyone has the parts list ( fitting sizes , coolant and oil lines specs...) for the install on the fd?

I'd reach out to Turblown, he seems to be the resident expert in those turbos. Good luck.

Read the EFR manual here:
http://www.full-race.com/articles/efrturbotechbrief.pdf

The coolant ports are M14 to 6AN.
The oil drain uses a narrow bolt pattern (1.5" bolt centers) OR you can use 3/8" NPT which it comes pre-threaded for.
Most auto parts stores stock Dorman PN: 56152. It's $6 and is a 3/8" NPT to 5/8" hose barb for if you plan on using 5/8" silicone hose. Or you can buy the correct narrow AN drain adapter or 3/8" NPT to 10AN fitting if you plan on using braided line.
The turbo already comes with a 4AN feed, just make a 4AN line to fit.

I have contacted them :

they quoted me $600 for "Custom coolant/oil lines run..."

:scratch:

thank you!

Comes with all fittings, some machined fittings for the oil drain, pre bent and flared lines for oil feed and water lines, etc.

Yup all nice parts !