Compressor maps?
#1
Twin Turbo LSX
Thread Starter
Compressor maps?
Hey, I am trying to read some compressor maps. Does anyone have an estimated of how much air a 3rd gen engine is moving. Also what kind of HP n/a should we be putting down?
My motor is street ported.
Thanks in advance.
My motor is street ported.
Thanks in advance.
#2
Twin Turbo LSX
Thread Starter
Also,
When you calculate the displacement of a 13b, is that 1.3 liter's per rotor face? Would that mean a 13b is techincally a 3.9liter? But, the eccentric shaft turns three times for every combustion cycle. I am confused on how displacement is calculated for our engines. What amount of cubic inch's should I use to calculate the the volume of air? 79.3 seems way to low for calculations.
I was in a debate with a guy who builds pistons engines about the displacement of our cars. he swears they are a 3.9 liter. Anyone care to share some knowledge?
When you calculate the displacement of a 13b, is that 1.3 liter's per rotor face? Would that mean a 13b is techincally a 3.9liter? But, the eccentric shaft turns three times for every combustion cycle. I am confused on how displacement is calculated for our engines. What amount of cubic inch's should I use to calculate the the volume of air? 79.3 seems way to low for calculations.
I was in a debate with a guy who builds pistons engines about the displacement of our cars. he swears they are a 3.9 liter. Anyone care to share some knowledge?
#4
Weird Cat Man
Here's a page on calculating stuff like this...
Either use 2.6 for the size of the engine OR do not divide by two in the first equation...
http://www.gnttype.org/techarea/turbo/turboflow.html
Brian
Either use 2.6 for the size of the engine OR do not divide by two in the first equation...
http://www.gnttype.org/techarea/turbo/turboflow.html
Brian
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM