borg warner 362, large street port, pump gas with water meth injection, boost spiked to 19 psi then back to 17 psi.

 

Nice, really nice!

 

Great numbers! Got a few questions if you don't mind....

1) What is the turbine A/R and what manifold are you running?

2) How much water are you spraying?

2) What RPM are you revving to?

 

Curious about your injection as well. Going with a water/meth injection and trying to figure out what size cc nozzle to use.

 

what afrs ?? not bad hp but 17psi and running meth injection i think you can run safe and make good power at 18 psi on pump gas only

 

video?

 

Turbine ar .91, custom exhaust manifold, 50/50, using coolingmist m10 nozzle, revving to 8200 rpm, Afr 11.2, I always recommend water injection cause when air gets hot there's alway the extra cooling for air. I don't use it for power gains but as insurance. Engine is also low compression 8.5 rotors.

 

No videos i will try to record next time.

 

i plan to do the same, it gets pretty damn hot and humid in the south.

great numbers, and thanks for posting.

i hope to contribute with a low boost (12-14psi) BW s366 dyno in a month.

these cheap BW units provide great bang for the buck.

 

also where does this turbo "spool" for you on the street? (rpm)

 

Yes they are great for the price.

 

wat fuel pump are u using? i should have got the s362 hopefully i get close to that power myself on my set up on race gas / meth

 

340 stealth