Blitz SUS Stainless Intake Question
07-19-03, 04:28 PM
#1
Blitz SUS Stainless Intake Question
I have a single Turbo with a 4" intake.
I've been looking high and low for a Blitz SUS intake
for it.
All the ones I find have a 4.5 in or larger intake or a
3" intake.
The temporary little K&N I have is only a dust cap.
Anybody know where I can get what I am looking for?
Thanks!
I've been looking high and low for a Blitz SUS intake
for it.
All the ones I find have a 4.5 in or larger intake or a
3" intake.
The temporary little K&N I have is only a dust cap.
Anybody know where I can get what I am looking for?
Thanks!
Last edited by Directfreak; 07-19-03 at 04:31 PM.
07-21-03, 01:53 AM
#2
Senior Member
Join Date: Jul 2001
Location: Northern California
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Please dont get one of those blitz filters, you are only going to cause yourself frustration with them. Their filtration ability is poor ( i have seen 2 different FD's with using them, both blew up their motors and when torn down, LOTS OF DIRT in the intakes). Basically those filters are good for keeping small turtles out of your intake and nothing more.
I would advise getting a really huge K&N since they work very well. I hope this helps you a little bit.
Graham
I would advise getting a really huge K&N since they work very well. I hope this helps you a little bit.
Graham
07-21-03, 06:24 AM
#3
Banned. I got OWNED!!!
I got the 6" filter(right side of your picture above) on my turbo. We took the 6" adapter that necks down to about 3", used a dremel to open it up to 4". Then we welded the 4" aluminum piping to the 6" adapter. Then used 4" silicon coupling to attach the pipe to the turbo inlet. I don't have any pictures, but it looks GOOD.
