Blitz SUS Stainless Intake Question
 

I have a single Turbo with a 4" intake.

I've been looking high and low for a Blitz SUS intake
for it.
http://www.blitz-na.com/Image/Filter2.jpg

All the ones I find have a 4.5 in or larger intake or a
3" intake.

The temporary little K&N I have is only a dust cap.

https://www.rx7club.com/forum/attach...postid=1225428

Anybody know where I can get what I am looking for?

Thanks!

Please dont get one of those blitz filters, you are only going to cause yourself frustration with them. Their filtration ability is poor ( i have seen 2 different FD's with using them, both blew up their motors and when torn down, LOTS OF DIRT in the intakes). Basically those filters are good for keeping small turtles out of your intake and nothing more.

I would advise getting a really huge K&N since they work very well. I hope this helps you a little bit.

Graham

I got the 6" filter(right side of your picture above) on my turbo. We took the 6" adapter that necks down to about 3", used a dremel to open it up to 4". Then we welded the 4" aluminum piping to the 6" adapter. Then used 4" silicon coupling to attach the pipe to the turbo inlet. I don't have any pictures, but it looks GOOD.