anyone running aux injector controller.
#1
anyone running aux injector controller.
Has anyone ever added injectors to their 7 with an additional injector controller? I'm adding two injectors for my turbo set up and will do this by adding a AIC. What type seems to work well and what type will not? I'm looking at an HKS. Any pros and Cons to speak of?
#2
I have a really nice little microtech one if you interested, I will let go for cheap I'll get the specs together for you if you want. Never been used. I bought it for a project then wound up selling the car.
#5
I used additional injectors controlled by a Greddy Rebic. this was before I went stand alone. they were plumed into the front of the TB. I had no problems, but I do not recomend this approach, the injectors shouldbe plumbed into the intake runners, do a search,the proper location for the injectors is pretty well established. ATP Turbo has a very reasonably priced holder on their site if you go the intake runner route. Carl
#7
I run a first gen 7 with a 2 injector setup. I'm changing to a 2nd gen plenum with the stock injector location. The controller is to drive the 2nd set of injectors in the 2nd gen plenum. I think it will be fine.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM